This particular wet mix macadam plant gives advanced quality substance of granular, that is sub based with impulsive power over production costs. It resolves largest situation of giving great base at crinkled sites. Hence, it stands as of that technology, which yields optimal quality predisposition for the further construction.
Homogeneous mixing of aggregates, precise blending, decorous emission of product without any separatism and binding of additives are the primary neutrals kept in mind while the scheming of this road structure equipment. Made with high quality steel components and other quality base tough construction makes it powerful and dependable.
This WM series can auspiciously render cold mix, colloid treated mixes, and lime/cement activated aggregate base mixtures. The Wet Mix Plant gives advanced operation controls and mechanization, current and evidenced technical solutions, plant installment at site with ample system activity.
The absolute scope of models are accessible with rated capacity, that is 60 – 200 TPH.
Cold bin feeder:
Four bin feeders are connected with each other in an anti-bridging manner that deepens casual and unvarying flowing of aggregates of various size. Smooth textured bin walls at valley angles permits independent flow of various size aggregates without hindering it at corners and precluding its projection to other aggregates. Auto-loading slide gates are furnished with each bin for letting aggregates to fall on conveyor. The aggregated flow from the feeders are functioned by using changeable frequency drives having relative controls. The high accuracy and great malleability in its operation are some of its essential features.
Water Tank & Metering :
Water tanks with flowing capacity are rendered with control valves so as to direct the flow of water into the mixers along with spray bars. For decent and precise metering, the water flow meter is connected to these. Also the water pumps are offered assistance with supple pipe grouping and give an extra vehemence.
Pug mill mixer
Twin shaft type mixers are used for concurrent mixing of various size aggregates along with additives. The paddles of mixers are made with advanced quality steel alloy that secures it protracted service life and wear tolerant capacity. The shafts of the paddles are affixed on tough bearings, which have anti-friction quality for consistent working of plant. The liners utilized here are immune to wear and tear and hence require a low fixing cost.
Storage Silo (optional)
In accordance with the plant capacity, storage silo are given with clam shell gates of accelerated and casual opening with hydraulic operation. This alleviates the speedy emission of intermingled aggregate. It is simple to transfer and to erect.
Anti Segregation Surge Hopper
The surge hopper provision permits emission into trucks without any blockage and spillage. Hydraulically functioned clam shell gates are opened across the total width of the hopper, precluding separatism of the mixed aggregate and give an effortless transfer of mix.
The mechanically operated control panels with weather secured cabins permit easy procedure of the plant. The meticulous and consecutive steps in the panels assure of straight control over the whole activity.
|Unit||WM 60||WM 100||WM 160||WM 200|
|Output||60 THP||100 THP||160 THP||200 THP|
|Four Bin Feeder||Capacity||40 Mt||40 Mt||54 Mt||54 Mt|
|Loading Width||3.02 M||3.02 M||3.66 M||3.66 M|
|Auxiliary Conveyor||W 450 mm/1.5 KW||W 450 mm/1.5 KW||W 450 mm/1.5 KW||W 450 mm/1.5 KW|
|Gathering Conveyor||W 600 mm/3.7 Kw||W 600 mm/3.7 Kw||W 600 mm/5.6 Kw||W 600 mm/5.6 Kw|
|Bin Vibrator||0.75 KW||0.75 KW||0.75 KW||0.75 KW|
|Connected Load||10.45 Kw||10.45 Kw||15.35 Kw||15.35 Kw|
|Shipping Dimension||13.5 x 2.55 x 2.45 M||13.5 x 2.55 x 2.45 M||16.25 x 2.55 x 2.75 M||16.25 x 2.55 x 2.75 M|
|Shipping Weight||10.4 Tons||10.4 Tons||12.1 Tons||12.1 Tons|
|Vibrating Screen||Screening Area||1.1 m2||1.1 m2||1.1 m2||1.1 m2|
|Connected Load||2.2 KW||2.2 KW||2.2 KW||2.2 KW|
|Charging Conveyour||W 600 mm / 5.5 Kw||W 600 mm / 5.5 Kw||W 600 mm / 5.5 Kw||W 600 mm / 5.5 Kw|
|Pug Mill||Capacity||1.38 Cu.m||1.38 Cu.m||1.90 Cu.m||2.40 Cu.m|
|No. Of arms||20||26||32||32|
|Connected Load||18.75 KW||18.75 KW||37.5 KW||45 KW|
|Shipping Dimension||14000x2550x3200 mm||14000x2550x3200 mm||3955x1580x3018 mm||3955x1580x3018 mm|
|Shipping Weight||6.8 T||7.2 T||4.2 T||4.55 T|
|Water Tank||Capacity||12000 Litres||12000 Litres||20000 Litres||20000 Litres|
|Water Pump||Connected Load||1.5 KW||1.5 KW||5.62 KW||5.62 KW|
|Hydraulic Power Pack||Connected Load||3.75 KW||3.75 KW||3.75 KW||3.75 KW|
|25 MT Storage Silo||Load out Conveyor||W 800 mm / 11.2 Kw||W 800 mm / 11.2 Kw|
|Shipping Dimension||4140x2980x3000 mm||4140x2980x3000 mm|
|Shipping Weight||5.15 T||5.15 T|
|40 MT Filler Silo*||Connected Load||4.45 KW||4.45 KW|
|Shipping Dimension||2420 x 10600 mm||2420 x 10600 mm|
|Total connected load||42 KW||45.8 KW||80.8 KW||88.2 KW|
|Genset||Recommended Capacity||70 KVA||80 KVA||125 KVA||150 KVA|